General Aircraft

Communication


AR6201
VHF/AM Transceiver, 2 ¼ ", Panel or Remote Mount

RT6201-(X1X)_h_20           RCU6201-(X1X)_h_02
The AR6201 VHF transceiver is smaller and lighter than the legendary AR 4201 due to implementation of state-of-art Digital Signal Processing technology. Its full graphic LCD is sunlight readable and dimmable for night operation. Dual watch mode allows monitoring of the active channel and a second frequency. It also includes an integrated VOX/Intercom circuit to facilitate communication between pilot and co-pilot. Up to 99 preset frequencies can be easily entered and stored in non-volatile memory. Other features include SCAN mode, music/aux input, programmable frequency labels, low power mode and stuck PTT indication. In addition, the last nine channels used are stored in memory for quick access. The RT6201 remote transponder allows for 2 tandem control heads for a single radio. TSO Certified.

Variations
AR6201-012 8.33/25kHz Switchable, 10W
AR6201-022 8.33/25kHz Switchable, 6W
AR6201-112 25kHz only, 10W
AR6201-122 25kHz only, 6W
RT6201-010 Remote 8.33/25kHz Switchable, 10W
RT6201-020 Remote 8.33/25kHz Switchable, 6W
RCU6201-012 Remote Control Unit for RT6201


Accessories
1US070 PTT switch with 1.5m cable
1A005 Special antenna for installation in glass fiber.
1PM004 Swanneck Dynamic microphone w/1.5m cable, DIN connectors
1PL042 Loudspeaker and special distribution box
1K062 Cable harness for use with Speaker/junction box
1AD042 Adapter AR3201 to AR6201
1E025 Twin Panel for two 2 ¼ inch units in Dzus mount
1E027 Twin Panel for two 2 ¼ inch units in a standard panel mount
MK6201-010 Mounting tray for RT6201


Connector Kits
CK6200-S Solder Style connector kit. Includes D-sub & BNC connectors
CK6200-C Crimp Style connector kit. Includes D-sub and BNC connectors
CK5000-S Solder Style connector kit for RCU6201 control head
CK5000-C Crimp Style connector kit for RCU6201 control head


Manuals and Specifications

Surveillance/ Transponder

 
BXP6401/BXP6402
Mode- S Transponder, 2 ¼ ", Panel or Remote Mount

BXP6401-1-(01)_h_20_ret_15Mai11 CU 6401-1-(01)_h_20_ret_15Mai11

The BXP6401/6402 is a LCD illuminated, compact and lightweight Mode-S transponder suited for VFR and IFR operations. The range of power supply voltage and the low power consumption make this transponder suitable for a wide range of aircraft. TSO Certified.

The transponder provides an interface to the central aircraft data system. It allows ELS, supports EHS, as well as ADS-B via extended squitter. The Mode-S ICAO address and additional fixed data are stored in a separate address module AM6400-1-(01), which is plugged on to the transponder and remains in the aircraft when the transponder is exchanged. BXP6401 is designed for panel mounting and fits into a 2 ¼ inch cut out. The BXP6402 version is designed for remote mounting. The sunlight readable display can be illuminated and dimmed for night operation. The BXP6401 transponder can be connected to blind encoders from most manufacturers via serial or parellel interface. For the simplest installation, the BE6400 blind encoder from Becker Avionics (sold seperately) connects directly to the transponder eliminating the need for an external power source.

BXP6401-1 is also directly exchangeable with the ATC4401-1 as the dimensions are the same and the main connector has the same pin assignment.

Variations
BXP6401-1 Panel Mount, Level 2/Class 1, 250W, 50,000ft
BXP6401-2 Panel Mount, Level 2/ Class 2, 150W, 15,000ft
BXP6402-1R Remote Mount, Level 2/ Class 1, 250W, 50,000ft
BXP6402-2R Remote Mount, Level 2/ Class 2, 150W, 15,000ft
CU6401-1 Control Unit for BXP6402, white LCD display.


Accessories
MK4401 Mount Tray for BXP6402
1A032 Transponder Antenna, BNC connector
BE6400-01 Blind Encoder, Transponder mounted
1SK504 Solder Style BNC connector for RG58U cable
AM6400 Address Module
AMP6400-2 Address Module USB programming interface
1AD043 Converter, RS232 to RS422
1K6402 Pre-wired Harness for BXP6402, 3m length
1K6401 Pre-wired harness for BXP6401, 3m length


Connector Kits
CK6400-S Solder Style connector kit. Includes D-Sub & BNC connectors
CK6400-C Crimp Style connector kit. Includes D-Sub and BNC connectors
CK5000-S Solder Style connector kit for CU6401 control head
CK5000-C Crimp Style connector kit for CU6401 control head
1SK503 Solder Style TNC connector kit


BXP6403

Mode-S Transponder, Standard Width, Panel Mount



The BXP6403 is an LCD illuminated, compact and lightweight Mode-S transponder. The range of power supply voltage and the low power consumption make this transponder suitable for a wide range of aircraft. TSO Certified. It is equipped with extended squitter and SI code function and it provides an interface to the central aircraft data system. It allows ELS, supports EHS, as well as ADS-B via extended squitter. The Mode S ICAO address and additional fixed data are stored in a separate address module, AM6400-1, which remains in the aircraft when the transponder is exchanged.

The BXP6403-1 is designed for slide-in mounting and fits into a 160.3 x 41.28 mm cut out. The use of an adapter allows for retrofit in a KT 76A tray. Panel inscriptions and sunlight readable display can be illuminated and dimmed for night operation. The transponder is prepared for the connection of blind encoders from different manufacturers. The encoder can be connected to the transponder by a serial or a parallel interface. Recommended Becker Type: BE6401-1-(01)

Variations
BXP6403-1 Panel Mount, Level 2/Class 1, 250W, 50,000ft
BXP6403-2 Panel Mount, Level 2/Class 2, 150W, 15,000ft
BXP6403-1 Retrofit Panel Mount, with retro-fit kit, Level 2/Class 1, 250W, 50,000ft
BXP6403-2 Retrofit Panel Mount, with Retro-fit kit, Level 2/Class 2, 150W, 15,000ft


Accessories
MK6403-1 Mounting Tray
1A032 Transponder Antenna, BNC connector
BE6400-01 Blind Encoder, Transponder mounted
1SK504 Solder Style BNC connector for RG58U cable
AM6400 Address Module
AMP6400-2 Address Module USB programming interface
1AD043 Converter, RS232 to RS422


Connector Kits
CK4401-S Solder Style connector kit. Includes D-Sub & BNC connectors
CK4401-C Crimp Style connector kit. Includes D-sub and BNC connectors


ATC4401 Mode A/C Transponder, 2 ¼ ", Panel or Remote Mount

      ATC4401

The ATC 4401 has been designed for aircraft where small dimensions and light weight are essential. It has a similar look and the same 2 1/4 inch panel layout as the hugely successful Becker AR 6201 transceiver. Outstanding performance combined with low power consumption is provided in two transistorized transmitters. TSO Certified.

The sunlight readable display is illuminated for night operations. The display shows the transponder code and current flight level, if an encoding altimeter is connected and Mode-C is selected. Despite the small size, the operation is simple and straight forward. It even allows he one button recall of two preselected codes. The ATC 4401 operates from 9.0 to 32.2 V DC. This makes it suitable for almost every application in general aviation. The transponder is prepared for the connection of blind encoders from different manufacturers. Recommended Becker Type: BE6401-1-(01)

Variations
ATC4401-1-175 Panel Mount, 150W, 15,000ft
ATC4401-1-250 Panel Mount, 250W, 50,000ft
ATC4401-2-175 Remote Mount, 150W, 15,000ft
ATC4401-2-250 Remote Mount, 250W, 50,000ft
CU5401-1 Control Unit for ATC4401-2


Accessories
MK4401 Mounting Tray for ATC4401
1A032 Transponder Antenna, BNC connector
1SK504 Solder Style BNC connector for RG58U cable
BE6400-01 Blind Encoder, Transponder mounted
1AD043 Converter, RS232 to RS422
AM6400 Address Module
AMP6400-2 Address Module USB programming interface
1K440 Pre-wired Harness ATC4401-1, 2.5m length
1K4401 Pre-wired harness for ATC4401-2, 2.5m length


Connector Kits
CK4401-S Solder Style connector kit. Includes D-Sub & BNC connectors
CK4401-C Crimp Style connector kit. Includes D-sub and BNC connectors
CK5000-S Solder Style connector kit for CU6401 control head
CK5000-C Crimp Style connector kit for CU6401 control head
Manuals and Specifications